A fixed price per metre may sound convenient, but it can be misleading. A straight swim platform is different from a cockpit containing hatches, curved corners, fittings and several separate panels. A useful estimate therefore starts with the actual boat and the deck areas involved.

1. Deck area and number of panels

The total area is an important starting point. It also matters whether the project involves one compact panel or several areas such as the cockpit, side decks, steps and swim platform. More separate pieces generally require more measuring, fitting and finishing.

2. Geometry, cut-outs and plank layout

Curves, corners, hatches, seat bases, cleats and other fixed fittings require accurate measurements. The direction of the planks, centre lines and borders also affects the design and level of detail.

3. Condition of the existing substrate

The substrate must be suitable, stable and sufficiently level. Old adhesive, loose areas, damage or uneven surfaces may need attention first. Photographs provide an initial impression, but not every substrate can be approved remotely.

4. Colour, caulking and custom details

A straightforward plank layout is different from a design containing borders, contrasting caulking, logos or other shapes. Colour alone does not automatically determine the full project cost, although the selected design can affect preparation and production.

5. Measuring, preparation and installation

A well-fitting deck requires dependable measurements. The approach depends on the geometry, access and selected material. The boat’s location, available workspace and marina arrangements may also affect the practical planning.

6. What is included in the enquiry?

Only compare quotations when the deck areas, preparation, borders and installation work are clearly defined. Ask how changes after measuring are handled as well. This prevents two prices from appearing comparable when their scope is different.

Information for a useful initial estimate

Send overview photographs of the boat, detail photographs of the substrate, approximate measurements and a clear indication of the required deck areas. Include the boat type, its location and your preferences for colour, caulking and overall appearance.

See the available colour and caulking directions and read how to maintain a synthetic teak deck.

Frequently asked questions

Questions about synthetic teak deck cost

What does a synthetic teak deck cost?

Cost depends on the area to be covered, the deck geometry, the condition of the substrate, the selected design and the installation work. Photographs and measurements are therefore needed for a useful initial assessment.

Why is the boat length not enough for a price estimate?

Boats of the same length can have very different numbers of panels, curves, cut-outs, borders and access conditions. The actual deck area and complexity matter more than length alone.

Does the substrate affect the cost?

Yes. The substrate must be suitable, stable and sufficiently level. Removing old adhesive or correcting damage and uneven areas changes the preparation required.

What information helps with an initial estimate?

Send overview and detail photographs, approximate measurements, the boat type, its location and your preferences for colour, caulking and deck areas. This allows the enquiry to be assessed more accurately.

Discuss your deck

Would you like a focused initial assessment?

Send photographs, approximate measurements, the boat type and the deck areas you have in mind. Schilpo Boats can then discuss a suitable next step.

Send WhatsAppCall nowRequest a quote